Cisco 10000 Series Configuration Manual page 141

Chapter A ANCP Command Reference
!
interface GigabitEthernet8/0/0.1
encapsulation dot1q 412
!
interface GigabitEthernet8/0/0.2
encapsulation dot1q 412
!
interface GigabitEthernet8/0/0.3128
encapsulation dot1q 3 second-dot1q 128
pppoe enable group global
service-policy output speed:eth:10600:5000:80/0
!
ancp neighbor name dslam1 id "10.2.3.4"
dot1q 3 second-dot1q 128 client-ID "10.2.3.4 ethernet8/0/0.3128
dot1q 412 client-ID interface GigabitEthernet8/0/0.2 "10.2.3.4 ethernet8/0/0.2"
radius-server host 192.168.164.228 auth-port 1645 acct-port 1646 non-standard
radius-server vsa send accounting
radius-server vsa send authentication
Related Commands Command
dot1q
ancp adjacency timer
ancp enable
ancp atm shaper
OL-14660-03
Description
Maps CPE clients of a DSLAM to VLAN subinterfaces on a broadband
remote access server (BRAS).
Specifies the interval between ANCP hello messages.
Enables ANCP.
Enables ANCP cell tax accounting for ATM U-interface connections.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
ancp neighbor
A-9