Cisco 10000 Series Configuration Manual page 165

Chapter A ANCP Command Reference
show caller
To view caller information, use the show caller command in user or privileged EXEC mode.
Syntax Description interface
line
full
timeouts
summary
user name
Command Modes
User EXEC
Privileged EXEC
OL-14660-03
show caller [[[interface interface-type interface-number | line {number [end-number]|
line-modem-options}] [full | timeouts]] | [summary | user name [detailed]]]
(Optional) Displays a summary of caller information for the specified interface.
interface-type—Interface type for which to show caller information. Valid
•
values for the interface-type argument are as follows:
–
–
–
• interface-number—Number of the interface for which caller information
appears. Valid values for the interface-number argument vary depending on
the interface type and platform.
(Optional) Displays a summary of caller information for the specified lines or
by line or modem options.
number [end-number]—Line number for which caller information is
•
shown. Specifying a value for the optional end-number argument results in
caller information being displayed for a range of line numbers. Valid values
for the number [end-number] arguments vary depending on the platform.
line-modem-options—Type of line or modem option for which caller
•
information appears. Valid values for the line-modem-options argument are
as follows:
–
–
–
–
–
–
(Optional) Provides expanded caller information.
(Optional) Displays session and idle limits and disconnect time.
(Optional) Displays total users logged, total ISDN users, total analog users, and
total external signaling analog and digital calls since the last reload command
was entered.
(Optional) Shows a summary of caller information for the specified username.
detailed—(Optional) Provides expanded information about the username.
•
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Async—Async interface.
Dialer—Dialer interface.
Serial—Serial interface.
aux line-number—Auxiliary line.
console line-number—Primary terminal line.
tty line-number—Terminal controller.
v110—V.110 modem.
vty line-number—Virtual terminal line.
x/y—Internal modem slot/port number.
show caller
A-33