Cisco 10000 Series Configuration Manual page 166

show caller
Command History Release
11.3(5)AA
12.1(3)T
12.3(6)
12.2(31)ZV1
Usage Guidelines The show caller command is used to:
•
•
•
You can configure output modifiers for each option type of the show caller command.
Cisco 10000 Series Router
The show caller command displays additional information on a virtual access interface and VCD
information if a session is bound to an ATM interface. If no ATM interface exists on the system, the
show caller user username full command shows the total number of input and output packets on the
virtual access interface associated with a session.
Examples
The following is sample output from the show caller command:
Router# show caller
Line
con 0
BR0:1
Vi1
The following is sample output from the show caller command with the summary keyword:
Router# show caller summary
Cisco 10000 Series Router
The following sample output from the show caller command shows the virtual access interface and VCD
information that displays when you issue the command:
Router# show caller user abc@gold.com full
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
A-34
Modification
This command was introduced.
The summary keyword was added.
This command was enhanced to display information about external signaling
calls.
This command was enhanced to display additional information about a virtual
access interface.
Display individual users and consumed resources on the network access server (NAS).
Inspect active call statistics for large pools of connections. (Debugging commands produce too
much output and tax the CPU too heavily.)
Display the absolute and idle times for each user. The current values for both of these settings are
displayed on the TTY line and the asynchronous interface. Users that have been idle for
unacceptably long periods of time can be easily identified. By using this information, you can define
timeout policies and multiple grades of services for different users.
User
-
hatteras
hatteras
933 Analog calls (0 VPDN Calls)
47 Ext-Sig Analog calls
0 ISDN calls (0 VPDN Calls)
0 Ext-Sig Digital calls
0 VPDN calls
0 PPPoA calls
0 PPPoE calls
980 Total unique users logged in
Service Active
TTY 00:08:21
PPP 00:00:14
PPP Bundle 00:00:13
Chapter A ANCP Command Reference
OL-14660-03