Examples - Cisco 10000 Series Configuration Manual

Router access network control protocol
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Configuring ISG Layer 4 Redirection
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
show redirect translations [ip ip-address]
Example:
Router# show redirect translations ip 10.0.0.0
Step 3
show redirect group [group-name]
Example:
Router# show redirect group redirect1
Step 4
show subscriber session [detailed] [identifier
identifier | uid session-id | username name]
Example:
Router# show subscriber session detailed

Examples

The following example shows sample output for the show redirect translations command:
Router# show redirect translations ip 53.0.0.2
Destination IP/port
152.0.0.2
12:37:10
The following is sample output for the show subscriber session command. This output shows that a
Layer 4 redirect is being applied from the service profile.
Router# show subscriber session uid 135
Subscriber session handle: 7C000114, state: connected, service: Local Term
Unique Session ID: 135
Identifier: blind-rdt
SIP subscriber access type(s): IP-Interface
Root SIP Handle: CF000020, PID: 73
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 40 minutes, 30 seconds, Last Changed: 40 minutes, 30 seconds
AAA unique ID: 135
Switch handle: F000086
Interface: ATM2/0.53
Policy information:
Authentication status: unauthen
Config downloaded for session policy:
From Access-Type: IP-Interface, Client: SM, Event: Service Selection Request, Service
Rules, actions and conditions executed:
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
4-8
Chapter 4
Server IP/port
23
9.2.36.253
Profile name: blind-rdt, 2 references
username
l4redirect
subscriber rule-map blind-rdt
Redirecting Subscriber Traffic Using Intelligent Service Gateway Layer 4 Redirect
Purpose
Enables privileged EXEC mode. If prompted, enter your
password.
Displays ISG Layer 4 redirect translations for sessions.
Displays information about ISG redirect server groups.
Displays ISG subscriber session information.
Prot
23
TCP
"blind-rdt"
"redirect to group sesm-grp"
In Flags
Out Flags
Timestamp
none
none
May 08 2003
OL-14660-03

Advertisement

Table of Contents
loading

Table of Contents