Cisco 10000 Series Configuration Manual page 111

Chapter 6 RADIUS-Based Shaping and Policing
Command
Router# show policy-map policy-map-name class
class-name
Router# show policy-map session [output | output
|uid]
Router# show running-config
Router# show running-config interface interface
OL-14660-03
Displays
The configuration of the class you specify. The policy map you
specify includes this class.
policy-map-name is the name of the policy map that contains the
class configuration you want to appear.
class-name is the name of the class whose configuration you want
to display. If you do not specify class-name, the router displays the
configuration of all of the classes configured in the policy map.
The inbound or outbound policy maps configured per session.
Also displays the dynamic policy map that is applied to the
subscriber session. If you do not specify any arguments, all
sessions with configured policy maps display, which might impact
performance.
input indicates inbound policy maps.
output indicates outbound policy maps.
uid is the session ID.
The running-configuration file, which contains the current
configuration of the router, including the default QoS policy.
The configuration of the interface you specify that is currently
configured in the running-config file, including any service
policies attached to the interface.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Verifying RADIUS-Based Shaping and Policing
6-21