Table of Contents
Advertisement
10.2. FORTNIGHTLY MAINTENANCE OPERATIONS
These operations can be performed by the machine owner and do not require any
special skills.
The fortnightly maintenance operations involve simple cleaning and lubrication actions and checks
on the safety devices, in order to ensure correct and safe operation of the machine.
For the fortnightly maintenance of the machine, proceed as follows:
10.2.1. L
UBRICATION OPERATIONS OF TREAD BELT AND RUNNING DECK
1. Lubricate the full length of the surface between the tread belt and the running deck, using the oil
can and special tube provided in the service box, inserting the tube between the tread belt and
the running deck at the front of the frame.
2. Start walking on the machine at a speed of approximately 5 km/h, being careful to tread on the
full width of the belt so as to distribute the oil evenly over its entire surface.
10.2.2. C
HECKING THE
1. With the machine turned on and running at approximately 5 Km/h, operate the safety switch and
check that the machine stops and shows the "SAFETY SWITCH" message on the display.
10.2.3. C
OMPLETE OPERATION
1. Check that, when it is switched on, the machine performs the power-on self test procedure
which:
• sounds the buzzer
• illuminates all the LEDs
• resets the incline
At the end of which the machine goes into standby, awaiting a keyboard command.
2. To check the correct operation of the machine:
• get on the machine
• press the "Start" key to begin the exercise
• check that the tread belt motor starts
• press the "+" and "-" keys on the keyboard and check that the tread belt speed varies
accordingly
• press the "↑" and "↓" keys and check that the incline varies accordingly;
• put on the heart rate meter and check that the machine correctly reads the heart rate value.
Page 10.2
SPAZIO FORMA: Service & Maintenance manual - rev. 1.0
"S
"
AFETY SWITCH
Advertisement
Table of Contents
