Routine Maintenance - Technogym SKILLRUN Series Manual

ROUTINE MAINTENANCE

The product should always be kept clean and free of dust, in compliance with common health and hygiene standards.
To clean the control panel, proceed as follows:
- turn the equipment off by moving the switch to the OFF (0) position;
- unplug the equipment power cable from the wall socket;
- clean the control panel with a damp, but not wet, cloth.
Every week, clean the equipment completely:
- turn the equipment off by moving the switch to the OFF (0) position;
- unplug the equipment power cable from the wall socket;
- clean the external parts with a damp sponge;
- move the equipment to one side so that you can vacuum underneath it.
Do not use chemical products or solvents.
Warnings
Do not rub too hard on the control panel and diagrams, or on the written instructions on the labels.
The safety of the equipment is assured only on the condition that it is carefully inspected every two weeks for any signs of damage
and/or wear.
Danger of falling. If the product is not connected to the power supply, the belt will turn freely. You must hold onto the side supports
when getting on and off the product
For maintenance operations not described in this manual, contact the Technogym Technical Support Service.
SKILLRUN
28