Table of Contents
Advertisement
SPAZIO FORMA: Service & Maintenance manual - rev. 1.0
7.20. DISASSEMBLING THE HANDLEBARS
Figure 7.20-1
Figure 7.20-1
1. Turn off the machine and unplug the mains
lead from the wall outlet.
For each handlebar:
2. Shift the rubber bushings a.
3. Back off the 2 dowels b using a 5-mm hex T
wrench.
4. Shift the rubber bushings c.
5. Back off the 2 dowels d using a 3-mm hex T
wrench.
6. Remove the HANDLEBAR
To reassemble the HANDLEBARS, carry out the
above steps in reverse order.
Page 7.25
Advertisement
Table of Contents
