Table of Contents
Advertisement
SPAZIO FORMA: Service & Maintenance manual - rev. 1.0
6. TROUBLESHOOTING
The troubleshooting procedures are shown in the form of flow charts. In order to facilitate
consultation, the following standard box shapes are used.
This type of box is the START point of the troubleshooting procedure. It
typically contains a description of the problem or malfunction.
This type of box represents a decision point in the troubleshooting procedure.
It typically contains a description of the DECISION to be made, with an
outcome that can be either a positive (YES) or negative (NO) response.
This type of box corresponds to a step in the troubleshooting procedure where
an ACTION must be carried out. It typically contains a description of the
ACTION necessary to resolve the problem. Therefore, after executing the
specified ACTION:
1. Check whether the problem has been resolved;
2. If the problem persists, it is recommended to resume the troubleshooting
A circled number (such as that shown on the left) next to a box of the
troubleshooting procedure indicates that detailed instructions for performing
that particular check or action are provided below the flowchart.
A circled letter (such as that shown on the left) is used to highlight a point in
the procedure. Typically, this indicator is used in page changes.
procedure from the point before the action was carried out.
Page 6.1
Advertisement
Table of Contents
