Microplex PP 404 User Manual page 55

This parameter covers a range of -
page and "+" (plus) is further down the page (see also the table in Appendix A Configuring
the Printer for VERT.POS.ADJ.).
Note: The set up of VERT.POS.ADJ. Will become effective at the next page of the form.
Therefore, it is recommended to perform VERT.POS.ADJ. set-up as long as the paper is in the
park position and before starting the print job

Fanfold Displacement (FANFOLD DIS)
A continuous form can manually be displaced by this function when it is either
correctly loaded at the park position or already fed and partly printed. The Fanfold
Displacement mode can only be called up in the status READY or BUSY
The key
Note:
As soon as the Fanfold Displacement mode is entered by pressing
printing and changes into the LOCAL mode. The display shows the message FANFOLD DIS
with the value 0.
1
2
3
4
5
Note: This parameter influences the line counter of the current print job and cannot be
saved. A form feed (FF) sent by the application to the printer cancel all these settings
2-6
15
/
60
has no effect when in the READY or BUSY mode.
a vertical displacement
Key Display
READY 4 ELQ
FANFOLD DIS. 0
FANFOLD DIS. 0, +1, +2, +3...
FANFOLD DIS....+3, +2,+ 1, 0
READY 4 ELQ
240
1
to + / Inch ( /
60
60
.
is possible..
Printer Operation
" 0,42 mm), where "-" is up the
the printer stops