Microplex PP 404 User Manual page 113

Appendix A Configuration of the printer

EMULATION
The emulation determines the set of commands available for the printer (see Appendix D and E). You
can activate the following emulations:

IBM PROPR.

IBM PROPR.AGM

EPSON LQ / ESC/P2
The selected Emulation will also be stored in the actual macro. With a change of the macro
note:
(e.g. Keys ,
Do not change the emulation within an application.
Be careful:

Character Set
When selecting a character set it can be further specified by the corresponding national variants. The
main groups are: EPSON EXT.GCT, CODE PAGES EE and EE2, ISO 8859/xx, IBM SET 1, IBM SET 2, and
IBM CODE PAGES.
All Character Set Tables are listed in Appendix C.
If a different macro is selected the default character set may change, e.g.

IBM PROPR. emulation has the character set IBM SET 2 as default.

EPSON emulation has the character set EPSON EXT.GCT as default.

LINE MODE
Possible values are:
LF = LF, CR = CR
LF = LF + CR
CR = LF + CR
LF, CR = LF + CR
, or is pressed) it is possible that the emulation will also be changed.
Line Feed will be executed after receiving a Line Feed by the interface.
Carriage Return will be executed after receiving
a Carriage Return by the interface.
The printer performs a Line Feed and additional a Carriage Return for
every Line Feed received by the interface.
The printer performs a Carriage Return and additional a Line Feed for
every Carriage Return received by the interface.
Line Feed and Carriage Return will be executed after receiving a Line Feed
or Carriage Return by the interface.
A-13