Microplex PP 404 User Manual page 114

Appendix A Configuration of the printer

$$-BEFEHLE
This function causes $$ either to be printed as $$ or to activate ESC commands within
an application.
If this function is set to YES the characters are interpreted by the printer in the following
way:
Bei der Einstellung JA werden die Zeichen

$$ like ESC [
und die Zeichen

$$/ like ESC .

Tear-off-mode (only for fanfold paper)
There are six possible settings within this mode:

NO

TEAR 10 S.

TEAR 10 S..FF

TEAR 1 S.

TEAR 1 S. FF

NO, SPECIAL
The NO SPECIAL setting is to be used with critical forms which cannot handle the return
movement of the paper.
With the YES setting the printer waits for one ore ten seconds and, unless further data
is received, moves the paper to the first perforation after the text.
Regardless of this setting, whenever changing from fanfold to the manual paper source,
the printer will request the fanfold paper to be torn off or at the setting NO SPECIAL
to be removed before the paper is moved to the park position.
A-14