Microplex PP 404 User Manual page 174

Table 3 (Cont.): Vertical Form Handling
Escape Sequence
ESC ]
ESC ] > s
Native Command
ESC [ > P1 ; P2 ; P3 ; P4 s SPSIF
Native Command
ESC [ P1 s
ESC [ ; P2 s
**) only Fanfold Printer, and Multi-purpose Printer
*) only Multi-purpose Printer
***) only High Speed Fanfold Printer and High Speed Fanfold Printer with Cutter
Mnemonic Function
Reverse Line Feed
IF Insert Form
Select Paper Source and Insert
Form, Print Gap, Paper Exit, Cut-Mode (any parameter > or P may be
skipped, see following alternative command sequences); > = Insert
Form
SPS Paper Source:
P1 = 0: Manual Feed **)
P1 = 1: ASF, Bin 1 *)
P1 = 2: ASF, Bin 2 *)
P1 = 3: ASF, Bin 3 *)
P1 = 6: upper Tractor ***)
P1 = 7: Tractor Feed (lower Tractor)
P1 = 8: ASF, Bins 1 or 2 *)
P1 = 9: ASF, Bins 2 or 3 *)
P1 = 1 0: ASF, Bins 1 or 2 or 3 *)
P1 = 1 5: upper and lower tractor ***)
AGC/PCC Procedure:
P2 = 0 : Automatic Gap Control
P2 = 1 : Print Gap for 1-ply copy
P2 = 2 : Print Gap for 2-ply copies
P2 = 3 : Print Gap for 3-ply copies
P2 = 4 : Print Gap for 4-ply copies
P2 = 5 : Print Gap for 5-ply copies
P2 = 6 : Print Gap for 6-ply copies
Appendix D IBM ProPrinter 4207, 4208 XL 24 Quick Reference
D-5