Microplex PP 404 User Manual page 224

P Ratio Width to Thin (default: 0 (2 to 1))
6
0
1
2
3
Note: Code 93, MSI 10/10, Code 128 are fixed 2.0 to 1
Best results for Code 39, 2 of 5 industrial, 2 of 5 interleaved, and Codabar with 2.5 to 1
P 7 Uni-directional or bi-directional printing - standard 0 uni-directional values
are: 0 or not programmed means no changes
1 uni-directional printing in LQ 2 bi-directional printing in LQ
3 uni-directional printing in NLQ 4 bi-directional printing in NLQ
Note: A switch from uni-directional to bi-directional printing is only possible if the parameter
UNI-DIRECT.CMD is set to YES via operator panel or
ESC-sequence.
Start Position of Bar Code Printing
The start position for bar code printing is the current print position.
For both horizontal and vertical printing, the print position after printing bar codes is the same
line as the start position next to the bar code printed.
Code 39
2 of 5 industrial
P
6
2 of 5 interleaved
value Codabar
Code 93
MSI mod 10/10
Code 128
2.0 to 1
2.5 to 1
3.0 to 1
3.5 to 1
Appendix F Bar Code Quick Reference
EAN 8
EAN 13
UPC-A
UPC-E
SC3
SC6
SC9
SC3
F-4