The Power Supply - Microplex PP 404 User Manual

Getting Started

1.6. The Power Supply

Mains Voltage
In general, the main's voltage selection is determined at factory sites.
Make sure that the specified voltage on the label (1) corresponds to your main's voltage:

The 230 V setting applies to the range of 180 to 264 V alternating current.
Note: Since an incorrect voltage selection can seriously damage the printer, please pay
special attention to the following.
Connect the printer to the mains using the power cord (2). First connect the cable to the
power cord socket and then to the mains.
Note: As the power cord serves as a safety cut off, its connection to the printer must be
accessible any time.
2
1
1-8