Pesu Programming - Toshiba Strata DK14 Installation And Maintenance Manual

PESU Programming

Enter Code 25 in Program 03 for a non-optioned PESU or Code 26 for a PESU supporting Off-
hook Call Announce. To program the PESU standard telephone ports, see
on Page 7-15. To program the PESU electronic telephone ports, see
Page 7-15. If there are no PESU options, skip Program 03 and run Program 91 instead.
Table 7-4 PESU Controls, Indicators, and Connectors
Control/Indicator/Connector
Off-hook call announce P10
Off-hook call announce P20
Off-hook call announce P40
Off-hook call announce P50
Off-hook call announce P60
Ring voltage jumper plug P90
Door phone W9 jumper wire
BGM W7 jumper pack
Strata DK I&M 5/99
Type of Component
10-pin connector
3-terminal jumper
White jumper wire
DK40i/DK424 Universal Slot PCBs
PEPU2 External Page Interface Unit
"PESU Programming"
"PESU Programming"
Description
Interface connector for optional Off-hook Call
Announce subassembly connector (used with
P20, P40, P50, and P60).
Used with P10, P40, P50, and P60.
Used with P10, P20, P50, and P60.
Used with P10, P20, P40, and P60.
Used with P10, P20, P40, and P50.
Sets ring generator voltage level for circuits 1
and 2.
H=190V P-P (factory setting)
L=130V P-P
When cut, configures PESU, circuit 5 for
installation of an optional HDCB.
When cut, configures PESU, port 07, circuit 8,
for BGM source connection (slot 01 only with
PCTU2 and PCTU1).
on
7-15