Toshiba Strata DK14 Installation And Maintenance Manual page 175

Bolt Cabinets to a Concrete Floor
1. Mount the DK424 Base Cabinet on Floor Mount Fixtures (see
2. Position the Base Cabinet at the selected installation location.
3. Mark the floor where holes will be drilled. Move the Base Cabinet prior to drilling.
Note Cover the Base Cabinet with a drop cloth to protect the power equipment from dust
created during drilling.
4. Use a hammer drill to make holes for 3/8-inch bolt anchors.
5. Install the bolt anchors, with plugs, in the drilled holes.
6. Using the driving tool and a hammer, drive each bolt anchor into the floor.
7. Move the Base Cabinet into position on the equipment room floor.
8. Secure the Base Cabinet to the floor using bolts, lock washers, and flat washers.
DK424 Base
Cabinet





RFMF
(Floor mount
fixture)
Figure 5-16 Floor Mount Installation – Concrete Floor
Bolt Cabinets to a Wooden Floor
1. Mount the DK424 Base Cabinet on Floor Mount Fixtures (RFMF). See
2. Position the Base Cabinet at the selected installation location.
3. Mark the floor where holes will be drilled. Move the Base Cabinet prior to drilling.
Cover the Base Cabinet with a drop cloth to protect the power equipment from dust
Note
created during drilling.
4. Drill pilot holes to make insertion of 3/8 inch lag bolts easier, and to prevent splitting of wood
flooring.
5. Move the Base Cabinet into position on the equipment room floor.
6. Secure the Base Cabinet to the floor using lag bolts, lock washers, and flat washers.
Strata DK I&M 5/99
Concrete
Floor
DK424 Installation
Cabinet Floor Mounting
Figures 5-13 and 5-16).
Bolt
Lockwasher
Bolt Anchor
Plug
1467
Figures 5-13 and 5-17.
5-25