Telephone Cord Connection; Connect And Apply Power To Base Unit - Toshiba Strata DK14 Installation And Maintenance Manual

Station Apparatus
Cordless Digital Telephone (DKT2004-CT)
3. Keep the base unit and handset away from sources of electrical noise (motors, fluorescent
lighting, etc.).
Important!

Telephone Cord Connection

There are two telephone line jacks on the back of the base unit of your cordless digital telephone:
"Line In" and "Line Out." You can connect the cordless digital telephone to both the telephone line
and a Strata DK digital telephone.
To connect cords for use as a stand-alone telephone
Connect the modular jack labeled "Line In" to the telephone wall jack.
...or
To connect cords for use with a desk telephone
1. Unplug the telephone line cord from your desk telephone.
2. Connect this cord to "Line In" of your cordless telephone.
3. Using the two foot modular cord that came with your cordless telephone, connect the jack
labeled "Line Out" to the desk telephone.

Connect and Apply Power to Base Unit

The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug
having one blade wider than the other). This plug fits into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit,
contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the
blades on the polarized plug.
To connect the cordless telephone using the AC adapter
1. Plug the AC adapter cord into the AC adapter input jack on the base unit (see
CAUTION!
AC Adapter
Figure 9-18 Cordless Telephone Connectors
9-26
Place the cordless telephone to the right of the DKT. If placed on the left of the DKT,
the cordless antenna will pick up a tone due to its close proximity to the DKT
speaker and electronic parts.
Use only the AC adapter supplied with your cordless digital telephone.
Modular
Cords
Line In to Digital Telephone Circuit
(DK14 KSU or DK40 Base KSU, KCDU,
PDKU2, RDSU)
Line Out
See Chapter 8 – DK40i/DK424 Universal
to DKT
Slot PCB Wiring
Figure 9-18).
Strata DK I&M 5/99