Toshiba Strata DK14 Installation And Maintenance Manual page 102

DK40i Installation
Printed Circuit Board (PCB) Installation
Assigns Immediate or Wink start to DID lines and auto camp-on and no-dial tone return
for DID lines.
Assigns DID lines to route per DNIS and ANI options (Program 71 and 72) or DID
numbers (Program *09).
Program 30: Disables RRCS for dial pulse operation.
Program 40: Assigns station access to lines (incoming and outgoing).
Program 41: Assigns station access to lines (outgoing only).
Program 42-0, 1~8: Assigns behind PBX/Centrex operation to each line.
Programs 45~48: Defines Toll Restriction for any line.
Programs 50~56: Defines Least Cost Routing assignments.
Programs 71 (1~5): Assigns DNIS or ANI option to DID lines.
Programs *71~*73: Assigns telephone to ring called [DN].
Program 93: Assigns names to lines.
The TDDU provides four DID lines and uses four station ports when installed.
3-34
Strata DK I&M 5/99