Others Menu - JVC GY-DV5000U Service Manual

1.9.13 OTHERS menu

In a service menu, place the cursor on "OTHERS" and push the SHUTTER dial to display the OTHERS menu.
Operation ways are almost same as CAMERA1 MENU, so please refer it.
Item
OFF
MEMORY SW
LOAD
START
MEMORY SW
OFF
SAVE
START
ALL RESET CANCEL
EXECUTE Resets all EEP-ROM data to default settings except adjustment data, hour meter data, and
MEM.EDIT Contents of the EEP-ROM can be edited directly
ADR: Address (0-03FF) display
DATA: Display of data embedded in address shown by ADR
Operation procedure
1. Rotate the SHUTTER dial to move the cursor to MEM.EDIT.
2. Push the SHUTTER dial to blink the "ADR" parameter.
3. Then rotate the SHUTTER dial to adjust the specified value.
4. Next, push the SHUTTER dial to blink the DATA parameter.
5. Rotate the SHUTTER dial to adjust the specified value.
6. Finaly, push the SHUTTER dial to store the data.
(NOTE)
Data that is crucial for the system is stored in the EEP-ROM, and making unadvised changes to it can cause the
unit to stop operating correctly. Please do not use anything other than the IEEE1394 ID setting.
– – – OT HERS – – –
M E M O R Y SW L O A D
M E M O R Y SW S A V E
A L L R E S ET
M E N . E D I T
D A T A : 0 0
P A G E B A C K
Fig. 1-9-15
Standard setting
Menu SW information is loaded from a remote domain.
Standard setting
Menu SW information is saved to a remote domain.
Standard setting
IEEE1394 ID data.
Default settings at time of shipment differ by market region.
I: for Japan, U: for USA, E: for EU, EC: for China
Table 1-9-12 OTHERS Menu Setting Items List
: O F F
: O F F
: C A N C E L
A D R : 0 0 0
Parameter
( is default setting when shipped from factory)
1-17