Removing The Optical Block Assembly And The Optical Filter Assembly - JVC GY-DV5000U Service Manual

1.4 REMOVING THE OPTICAL BLOCK ASSEMBLY AND
THE OPTICAL FILTER ASSEMBLY
(1) Remove the right side cover (see section 1.2.2).
1
(2) Remove the 4 screws
1
Fig. 1-4-1
(3) Remove the wire assembly from the connector CN4,CN33
and CN35, and pull the optical block assembly and front panel
together with the front.
CAUTION
Be careful not to damage the boards or FFC cables.
CN4
Fig.1-4-2
.
1
CN35
CN33
2
(4) Remove the 4 screws , then remove the TGDF board and
mounting bracket.
2
Fig.1-4-3
(5) Flip open CN1,CN2 and CN3 and unplug the FFC cable.
CN1
CN2
Fig.1-4-4
3
(6) Loosen the 2 screws and remove the connector (B), then
remove the optical filter assembly in the direction of the ar-
row.
(B)
Fig.1-4-5
2
CN3
3
1-3