Others Menu Screen - JVC GY-DV5000 Instructions Manual

11-13 OTHERS Menu Screen

The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)
OTHERS (1/2) Menu Screen
Item
OUTPUT Selects whether characters should be displayed on the screen of a monitor
CHAR. connected to MONITOR OUT connector or Y/C OUT connector.
OFF : No on-screen-display
ON : On-screen-display
NET REMOTE Set when the optional Network Pack KA-DV5000 is attached. Selects
whether the GY-DV5000 should be controlled by an external signal input
via the network pack.
OFF : Not controlled.
ON : Controlled. (Operation from the main unit is disabled.)
DV REC Selects whether or not the VTR trigger command should be output through
TRIGGER the DV connector. Set to ON when the GY-DV5000's DV signal should be
recorded on another component for backup.
OFF : VTR trigger command is not output.
ON : VTR trigger command is output.
* Set this item to OFF, when the Backup Recording function of BR-DV600A
or BR-DV3000 is used.
LONG PAUSE Selects the time (minutes) before the tape protect mode (drum head
TIME rotation stopped) is engaged when the record-standby condition continues.
3MIN : 3 minutes
30MIN: 30 minutes
* When used in a cold environment or when the stopped or STILL status
continues, the setting will be 3 minutes regardless of the setting on the
menu.
REM FF/REW Selects the operation when the FF or REW command is received when
MODE the GY-DV5000 is remote controlled using a non-linear editing controller.
FF/REW : Fast forward or rewinding is executed. Normally, this setting
SEARCH : FWD search or REV search is executed.
STEP SLOW Selects the amount of frames advanced in the STILL mode.
MODE (Frame advance is only available with an external remote control signal.)
FIELD : Field-by-field frame advance.
FRAME : Frame-by-frame frame advance.
NEXT PAGE To display the OTHERS (2/2) menu screen, align the cursor with this item
and then press the SHUTTER dial.
PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while
the cursor is at this position.
Function
is used.
Use this setting when detection of the beginning of programs
(cue-up) works less than satisfactorily when this item is set
to FF/REW.
11. MENU SCREENS
Variation Range Initial Setting
OFF OFF
ON
OFF
OFF
ON
ON
OFF
ON
30MIN
3MIN
30MIN
FF/REW
FF/REW
SEARCH
FRAME
FIELD
FRAME
–––––
–––––
–––––
–––––
77