Others[1/2] Menu Screen - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 96 Tuesday, October 24, 2006 3:11 PM
MENU SCREENS

OTHERS[1/2] Menu Screen

The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)
Item
ANALOG OUT CHAR. Sets whether or not to display characters such as status and menus on the screen for the [Y/P
OUT] terminals.
ON
OFF
MEMO
When ANALOG OUT CHAR. item is set to ON, the content displayed on the viewfinder is also displayed in the
video from the video output terminal. During VTR recording, the mode is displayed in red on the viewfinder. How-
ever, color is not applied for the following video outputs.
• Component output of recording or playback in DV format
• Composite output
SDI OUT CHAR. Sets whether or not to display characters such as status and menus on the screen for the [HD/SD SDI] terminal.
ON
OFF
LONG PAUSE TIME Selects the time (minutes) before the tape protect mode (drum head rotation stopped) is engaged when the record-
standby condition continues.
3MIN
5MIN
* When used in a cold environment or when the stopped or STILL status continues, the setting will be 3 minutes or
less regardless of the setting on the menu.
* Normally, set "3MIN" and use this to prevent head clogging and tape damage.
ALARM VR LEVEL Selects whether or not alarm sound is emitted and the volume of the alarm sound.
The alarm sound is output through the monitoring loudspeaker and the PHONES jack.
OFF
LOW
MIDDLE : Alarm sound is normal.
HIGH
FRONT TALLY Selects the lighting method of the FRONT TALLY lamp during recording.
BLINK
ON
OFF
BACK TALLY Selects the lighting method of the BACK TALLY lamp during recording.
BLINK
ON
OFF
FORMAT LED Sets whether or not the [HDV/DV LED] g on page 15 lights for HDV format or DV format.
ON
OFF
GENLOCK.. Calls up the GENLOCK menu screen.
Adjusts the H PHASE or SC PHASE of image signals of this device according to the external synchronization signal
input to the [GENLOCK IN] terminal.
X See page 99.
NEXT PAGE To display the OTHERS[2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while the cursor is at this position.
96
Function/Setting (bold characters indicate initial settings)
: On-screen display.
: No on-screen display.
: On-screen display.
: No on-screen display.
: 3 minutes
: 5 minutes
: Sound is not output.
: Alarm sound is soft.
: Alarm sound is loud.
: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
steadily during recording.
: The lamp lights only during recording.
: The lamp is always off.
: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
steadily during recording.
: The lamp lights only during recording.
: The lamp is always off.
: Lights.
: Does not light.
/P ] and [VIDEO
B R