Removing The Dbcp Board - JVC GY-DV5000U Service Manual

1.5.2 Removing the DBCP board

(1) Open the right side cover (see section 1.2.2).
2
(2) Remove the 2 screws
opened in the direction of arrow.
Fig. 1-5-2
1.5.3 Removing the ALS board
(1) Open the right side cover (see section 1.2.2).
3
(2) Remove the 9 screws
moved.
3
Fig. 1-5-3(1)
(3) Be careful do not damage each wire assembly and FFC ca-
bles when removing ALS board.
, Now the DBCP board can be
2
. Now the ALS board can be re-
3
3
1.6 REMOVING THE LCD MONITOR
(1) Open the right side cover (see section 1.2.2). And remove
the each wire assembly and FFC cable from ALS board side.
1
(2)Remove the 1 screws at the front of right side cover. Then
slide the cover plate toward the arrow side and remove it.
2
(3) Remove the 2 screws .
Fig. 1-6-1
3
(4) Remove the 2 screws
fixed on M RELAY board.
(5) Remove FFC cable from CN911 gently and remove M RE-
LAY board.
3
Fig.1-6-2
2
1
fixed on bracket and 2 screws
CN911
4
M RELAY board
4
1-5