Adjustment Menu - JVC GY-DV5000U Service Manual

3.3 ADJUSTMENT MENU

3.3.1 Switches and Functions Used in Adjustments
Most of the adjustment items employ microcomputer-controlled adjustments using electric potentiometers. The adjustment data is
stored in EEPROM.
The switches used in the adjustments and their functions are as follows.
• STATUS button
• EDIT SEARCH +, EDIT SERCH – : Press to select the adjustment item.
• SHUTTER dial (rotate)
• SHUTTER dial button (push in )
3.3.2 Procedure
(1) Turn the power ON, while holding the EDIT SEARCH + and EDIT SEARCH – buttons
(2) When the power is ON, press the STATUS button to display the ADJUST MENU.
(3) Push the SHUTTER dial button so that "*" blinks, and rotate the SHUTTER dial to the specified value while observing the
designated TP and measuring instrument. (In this mode, SHUTTER dial rotate while holding the MENU button, then parameter
value change quickly.)
(4) After completing the adjustment, push the SHUTTER dial button to delete the "*" and store the adjustment value in memory.
(If do not push the SHUTTER dial button, adjustment value will not stored.)
(5) Press the EDIT SEARCH + and EDIT SEARCH – button to select the next item to adjust.
(6) Adjust for each item to do same procedure as above (3)(4).
(7) After completing all adjustments, press the STATUS button to exit the ADJUST MENU.
(8) To return to normal operation mode, turn the power OFF and ON again.(If did not re-start camera power, camera will be still in
ADJUST MODE, so if press the MENU button then ADJUST MENU indicate on the screen and will not indicate normal menu
screen.)
– – – A D J U S T
4 . I N G A I N ( B )
V R
C T
S E
R E
On-screen adjustment menu
3-4
: Press to start or exit from the adjustment menu.
: Rotate to adjust the selected item.
: Press to start an adjustment and store the adjustment value in memory.
M E N U – – –
*
D A T A : 1 5 5
L O U T : 1 6 5
T D A T A : 2 0 5
R : G : B
. F X X X X X X X X
Usually not displayed. Starts blinking
when the SHUTTER dial is pushed.
Potentiometer value
D/A output value
Adjustment value currently set
:
X
Displayed as the adjustment menu items.
The value changes when
the potentiometer value is
stored in memory.