JVC GY-DV5100 Instructions Manual
JVC GY-DV5100 Instructions Manual

JVC GY-DV5100 Instructions Manual

Dv camcorder
Hide thumbs Also See for GY-DV5100:
Table of Contents

Advertisement

DV CAMCORDER
GY-DV5100
* The illustration shows the GY-DV5100 DV Camcorder with the optional lens, viewfinder and Microphone attached.
Thank you for purchasing this JVC product. Before operating
this unit, please read the instructions carefully to ensure the
best possible performance.
For Customer Use :
Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No. GY-DV5100
Serial No.
INTRODUCTION
CONTROLS,
INDICATORS AND
CONNECTORS
BASIC SYSTEM
CONNECTIONS AND
ADJUSTMENTS
POWER SUPPLY
PREPARATIONS
SETTING AND
ADJUSTMENTS
BEFORE SHOOTING
SHOOTING
OPERATION
PLAYBACK MODE
INSTRUCTIONS
USING EXTERNAL
COMPONENTS
TIME CODE
OPERATION
MENU SCREENS
FEATURES OF THE
CAMERA SECTION
OTHERS
This instruction manual is made from 100% recycled paper.
LWT0230-001A
DV CAMCORDER
DV CAMKORDER
CAMESCOPE DV
CÁMARA DE VÍDEO DIGITAL
VIDEOCAMERA DIGITALE
GY-DV5100
GY-DV5101
* The illustration shows the GY-DV5100/GY-DV5101 DV Camcorder with the optional lens, viewfinder and Microphone attached.
Thank you for purchasing this JVC product. Before operating
this unit, please read the instructions carefully to ensure the
best possible performance.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
INSTRUCCIONES
ISTRUZIONI
This instruction manual is made from 100% recycled paper.
LWT0231-001A
INTRODUCTION
CONTROLS,
INDICATORS AND
CONNECTORS
BASIC SYSTEM
CONNECTIONS AND
ADJUSTMENTS
POWER SUPPLY
PREPARATIONS
SETTING AND
ADJUSTMENTS
BEFORE SHOOTING
SHOOTING
OPERATION
PLAYBACK MODE
USING EXTERNAL
COMPONENTS
TIME CODE
OPERATION
MENU SCREENS
FEATURES OF THE
CAMERA SECTION
OTHERS

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for JVC GY-DV5100

  • Page 1 DV CAMCORDER GY-DV5100 * The illustration shows the GY-DV5100 DV Camcorder with the optional lens, viewfinder and Microphone attached. Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.
  • Page 2: Important Safeguards

    19. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition. Thank you for purchasing the JVC GY-DV5100/GY-DV5101 DV Camcorder. These instructions are for the GY-DV5100E and GY-DV5101E. The text mainly deals with the GY-DV5100E.
  • Page 3 ● Consult the dealer or an experienced radio/TV technician for help. CAUTION CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
  • Page 4: Main Features

    ● The transient section between scenes recorded on other Other use may infringe on the rights of copyright holders. ● JVC cannot assume liabilities that may derive from the units and those recorded on this unit may appear disturbed.
  • Page 5: Table Of Contents

    CONTENTS 7. SHOOTING OPERATION INTRODUCTION 7-1 Basic Recording Operation ... 54 7-2 Searching for Recorded Scenes (Edit Search) ... 56 7-3 If the Record-Standby Mode Continues ... 57 MAIN FEATURES ... 4 7-4 Checking Recorded Contents in Record-Standby CONTENTS ... 5 Mode (Recording Check Function) ...
  • Page 6: Precautions For Proper Use

    1. INTRODUCTION 1-1 Precautions for Proper Use ● Supply voltage ● Precautions for transportation Make sure that the power is between 11 V and 15 V DC. If Do not drop or hit the unit against a hard object. the power voltage is too low, abnormal color and increased ●...
  • Page 7: Routine And Periodical Maintenance

    1-2 Routine and Periodical Maintenance The GY-DV5100 incorporates precision mechanical parts, which will collect dirt, wear out and deteriorate as the unit is used. After the unit has been used for a long period even in a normal environment, the heads, drums and tape transport mechanisms also collect dirt.
  • Page 8: Videocassette To Be Used

    – – 1-5 Battery Pack to be Used The GY-DV5100 can use any of the following battery packs. * A flat shape type battery pack cannot be connected directly ● Flat shape type to the camera. It is necessary to mount the optional battery ●...
  • Page 9: Front Section

    1-6 Condensation ● If the unit has been cooled down in a cold place and is then ● “CONDENSATION ON DRUM” is displayed on the LCD carried to a warm place, the moisture contained in the warm monitor and in the viewfinder when condensation occurs in air may adhere to the head drum or tape guides and be cooled this unit.
  • Page 10: Right Side Section

    2. CONTROLS, INDICATORS AND CONNECTORS [AUTO WHITE/ACCU FOCUS] switch White Balance: ● First, position a white object to occupy 80% of the centre of the screen. ● When the WHT.BAL switch on page 14 is set to A or B, setting this switch to the upper position (“AUTO WHITE”) will provide automatic adjustment for white balance.
  • Page 11 2. CONTROLS, INDICATORS AND CONNECTORS [AUTO IRIS] Auto iris level switch [CAM] Camera mode indicator This switch selects the automatic iris adjustment reference This indicator lights when the camera is in the Camera value according to the condition in which the camera is used. mode.
  • Page 12 2. CONTROLS, INDICATORS AND CONNECTORS 2-2 Right Side Section (Cont’d) [Camera Setting Section] EDITSEARCH FILTER 3200K 5600K 5600K 5600K / ND 1 64 STATUS SHUTTER MENU AUTO IRIS FULL AUTO BACK L NORMAL SPOT L POWER [GAIN] Sensitivity selector switch ●...
  • Page 13 2. CONTROLS, INDICATORS AND CONNECTORS OPEN EDITSEARCH MONITOR FILTER 3200K 5600K 5600K 5600K 1 64 / ND STATUS SHUTTER LCD BRIGHT DISPLAY MENU AUDIO PULL LEVEL OPEN FRONT REAR AUTO IRIS FULL AUTO BLACK LOLUX CH-1 CH-2 CH-1 CH-2 MODE AUDIO INPUT BACK L STRETCH...
  • Page 14: Left Side Section

    2. CONTROLS, INDICATORS AND CONNECTORS 2-3 Left Side Section FRONT MIC IN LINE OUT CH-1 LENS Y/C OUT MONITOR OUT CH-2 [MONITOR OUT] Monitor output connector (BNC) [CH-1/CH-2 LINE OUT] CH-1/CH-2 line output ● Composite video signal output connector. connector (RCA) ●...
  • Page 15: Top Section

    PLAY STILL [TALLY] Tally lamp This lamp lights up when the GY-DV5100 enters the record mode. It blinks during the transition to the record mode. ● Use the BACK TALLY item on the OTHERS (2/2) menu screen to select whether or not the lamp should light and the lighting pattern.
  • Page 16 If the unit still does not work normally, please consult the person in charge of professional video equipment at your nearest JVC-authorized service agent. 2. CONTROLS, INDICATORS AND CONNECTORS 2-5 Rear Section (Cont’d)
  • Page 17: Indications On The Lcd Monitor And In The Viewfinder

    2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder In addition to showing the EE image and the playback picture, the LCD monitor and viewfinder are also used for the following character displays. To show characters on the LCD monitor, press the DISPLAY button briefly. ■...
  • Page 18 2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d) ■ Status Screens in the Camera Mode 00:00:00:00 SKIN AREA –3dB Event display area Event display area FIL1 F5.6 STBY 01/02/03 AM01:23:45 STBY 01/02/03 AM01:23:45 F GD STATUS 0 Screen STATUS 1 Screen...
  • Page 19 2. CONTROLS, INDICATORS AND CONNECTORS 9 Event Indication When the Gain or Shutter Speed is changed manually, the setting condition is displayed for about 3 seconds at the time the change is made. Setting Condition Contents of Indications When the gain value is changed GAIN –3 dB, 0dB, 3dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB.
  • Page 20 2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d) Item VTR mode indication STBY : In record standby mode (record-pause mode) : During recording ED.FWD : Edit search in forward direction ED.REV : Edit search in reverse direction PLAY : During playback : During fast forward...
  • Page 21 2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d) ■ Magnified Status Indications on the LCD Monitor The characters on the status screens can be showed alone in magnified size on the LCD monitor. OPEN EDITSEARCH MONITOR...
  • Page 22 2. CONTROLS, INDICATORS AND CONNECTORS ■ Alarm Message Display ● The following alarm messages are displayed while the Status(0, 1, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode. If an alarm is generated while the Status 2 screen is shown, the Status 0 screen returns to display the alarm.
  • Page 23 2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d) ■ Auto White Balance Indication (Camera mode only) The AUTO WHITE indication and the result of the operation are displayed during the auto white balance adjustment operation. ☞...
  • Page 24: Basic System

    Please use the Focus Manual Unit (FMM-8, CHF-3, CFC-12-990) manufactured by Fujinon. 2 The optional service parts are required to attach the SHOULDER BELT. 1. PIN (SC46310-001) 2. SPACER (SC46311-001) For details, please consult your JVC authorized dealer. EARPHONE VIDEO LIGHT (ANTON BAUER.
  • Page 25: Attaching The Zoom Lens

    Hole back focus. ● Set the GY-DV5100's power switch to “OFF” before the zoom lens is attached or detached. When unplugging the cable connector, first remove the lens itself. Then grasp this portion and pull out.
  • Page 26 3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS 3-6 Attaching the Tripod Base (Provided) Use the provided tripod base to place the camera on a tripod. Attach the tripod base on the tripod by using the hole that balances the unit most optimally. While pushing the safety lever, pull the lock lever toward the front until the front mount clip clicks into place.
  • Page 27: Power Supply

    DC power is applied. Then switch ON again. ● If the GY-DV5100 is left with the battery pack attached, a small amount of power is consumed even if the POWER switch on the GY-DV5100 is set to OFF. Remove the battery pack when the GY-DV5100 is not going to be used.
  • Page 28 To use the NP-1 type battery, remove the Anton-Bauer Battery holder and attach the NP-1 type battery holder to the camera. Use the following battery case. Battery case: SCV2978-002 For details, please consult your JVC authorized dealer. Detaching the Anton-Bauer Battery Holder and Attaching the Battery Case Be careful of pins.
  • Page 29 To use an Anton-Bauer battery pack (DIONIC 90, Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to detach the battery case from the GY-DV5100 and replace it with the Anton-Bauer battery holder. Use the following battery holder.
  • Page 30: Remaining Battery Power Display

    After the remaining battery power warnings appear, the Battery lamp BATT ALARM GY-DV5100 automatically stops operation if the battery power operation is continued. REC/ALARM lamp Operating Time with Battery Pack ● Battery operating time may differ depending on the age of...
  • Page 31: Turning The Power On

    STOP. VTR mode The GY-DV5100 enters the VTR mode. The camera image will not be displayed in the viewfinder or on the LCD monitor. When a videocassette is loaded, the GY-DV5100 enters the stop mode.
  • Page 32: Cassette Loading And Unloading

    OPEN knob Cassette cover ● A cassette cannot be loaded or unloaded while the GY-DV5100 is in POWER OFF mode. ● Use a standard DV videocassette or a MiniDV videocassette. ● Press at the center portion of the cassette back and insert the cassette tape straight into the slot.
  • Page 33: Viewing The Lcd Monitor

    5. PREPARATIONS 5-3 Viewing the LCD Monitor The LCD monitor’s orientation, angle, and brightness, etc. can be changed. LCD lock and release knob LCD monitor ■ Opening the LCD monitor Slide the LCD lock and release knob toward the rear section to open the LCD monitor.
  • Page 34 5-4 Setting, Displaying and Recording the Date and Time The date and time of the built-in clock should be set. Powered by the built-in backup battery the set date and time data continue to count even when the power is switched off. ●...
  • Page 35 5. PREPARATIONS 5-4 Setting, Displaying and Recording the Date and Time (Cont’d) TIME/DATE menu screen Display the screen for setting the date and time. Rotate the SHUTTER dial to align the cursor ( ) with the ––– TIME/DATE ––– CLOCK ADJUST item, and then press the SHUTTER dial. DISPLAY ●...
  • Page 36 Displaying the Time and Date on the Screen Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen. TC/UB/CLOCK menu screen Display the TIME/DATE menu screen. –––...
  • Page 37 In this case, recharge the built-in battery and then set the date and time and time code data again. However, it is possible to use the GY-DV5100 even if the bulit-in battery is discharged but the date and time and time code data cannot be recorded.
  • Page 38: Camera Settings

    6. SETTING AND ADJUSTMENTS BEFORE SHOOTING 6-1 Camera Settings POWER SUPPLY 1 First place a charged battery pack in the battery case on the rear section of the unit. If battery pack is not used, connect DC power to the DC INPUT connector on the OPEN EDITSEARCH MONITOR...
  • Page 39: Viewfinder Adjustment

    Color video monitor Connect a color video monitor to the MONITOR OUT connector of the GY-DV5100. Set the COLOR BARS/CAMERA/AUTO KNEE switch to BARS to output the color bar signal (SMPTE type color bars).
  • Page 40: Back Focus Adjustment

    6. SETTING AND ADJUSTMENTS BEFORE SHOOTING 6-5 Back Focus Adjustment It is only necessary to perform this when the lens is attached 4. 6. for the first time or when focusing is not correct in both the telephoto and wide-angle positions. It is easier to adjust back focus when the subject is more than 3 meters from the camera.
  • Page 41: Recording Level Adjustment

    (LINE/MIC) switch ■ Selecting the REAR AUDIO IN connector The GY-DV5100 is provided with the FRONT MIC IN connector and the REAR AUDIO IN connector for audio input. Select the sound to be input to the REAR AUDIO IN connector Two channels of sound can be recorded on the tape in digital using the REAR AUDIO IN (LINE/MIC) switch.
  • Page 42: Monitoring Audio During Recording

    PHONES jack Focusing ring OPEN knob Set the POWER switch to ON. ● Power is supplied to the unit. The CAM indicator lights up. The GY-DV5100 is in the Camera mode when the CAM indicator is on. OPEN EDITSEARCH MONITOR FILTER...
  • Page 43: Searching For Recorded Scenes (Edit Search)

    ● If the VTR trigger button is pressed very quickly and repeatedly, or the POWER switch is moved immediately after the trigger button is pressed, the viewfinder REC indicator lamp may blink and the GY-DV5100 may not enter the record mode. To remedy this condition set the POWER switch to OFF and wait for 5 seconds or more before turning the power on again.
  • Page 44 STOP 01/02/03 AM01:23:45 VTR mode indication 7-4 Checking Recorded Contents in Record-Standby Mode (Recording Check Function) This function is available only when the GY-DV5100 is in the RET button standby mode. In the record-standby mode, approximately 2 seconds of the last recorded portion can be played back.
  • Page 45: Header Rec Function

    7. SHOOTING OPERATION 7-5 HEADER REC Function When the VTR trigger button is pressed while the STOP button is pressed, this function first records the color bar video and the test tone (1 kHz sine-wave) of the built-in signal generator at the beginning of the tape. Then it records the black video signal and the mute audio signal for the duration specified in advance.
  • Page 46 ■ How to set the HEADER REC menu screen Display the HEADER REC menu screen. Press the STATUS button for 1 second or longer to display HEADER REC menu screen the TOP MENU screen. Use the SHUTTER dial to select TC/UB/CLOCK menu –––...
  • Page 47: Recording The Color Bars

    7. SHOOTING OPERATION 7-6 Recording the Color Bars OPEN EDITSEARCH MONITOR FILTER 3200K 5600K 5600K 5600K 1 64 / ND SHUTTER STATUS LCD BRIGHT DISPLAY MENU AUDIO PULL LEVEL OPEN FRONT REAR AUTO IRIS FULL AUTO BLACK LOLUX CH-1 CH-2 CH-1 CH-2 MODE...
  • Page 48: Playback Mode

    POWER switch MODE switch MEMO: MEMO: ● The GY-DV5100 can play back the following three types ● In the VTR mode, the camera image is not output on the of videocassettes: LCD monitor, in the viewfinder or through the video output •...
  • Page 49: Variable Slow Playback

    CH-1 and CH-2. (4-channel recording is possible in the case of DV input.) When the GY-DV5100 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH- EDIT SEARCH 4 channels, the AUDIO SELECT item on the AUDIO/VIDEO menu screen must be set.
  • Page 50: Connecting A Video Component With Dv Connector

    9. USING EXTERNAL COMPONENTS 9-1 Connecting a Video Component with DV Connector Connecting the GY-DV5100 to another video component equipped with DV I/O connector (IEEE1394 standard) using a DV cable (optional) enables dubbing of digital signals with high picture quality and high-quality sound.
  • Page 51: The Viewfinder

    Backup Recording of the GY-DV5100's Camera Image and Sound Through the DV Connector The GY-DV5100’s camera image and sound can be recorded for backup on another component that is equipped with DV connector. Recording operation is performed on the backup equipment simultaneously with performance of the recording operations on the GY-DV5100.
  • Page 52: Displaying Time Code

    10. TIME CODE OPERATION The GY-DV5100 records SMPTE-standard time codes and user’s bits. In the play mode or the record mode, the reproduced time codes or user’s bits are shown on the LCD monitor or in the viewfinder. ● Time code data cannot be output through the unit’s connectors.
  • Page 53: Presetting And Recording Of Time Code

    10. TIME CODE OPERATION 10-2 Presetting and Recording of Time Code The time codes or user’s bit data from the internal time code generator can be recorded at the time of recording scenes. To preset the Time Code, make the following settings. ■...
  • Page 54 10. TIME CODE OPERATION TIME CODE PRESETTING PROCEDURE The time code and user’s bit data are preset on the TC/UB/ CLOCK menu screen. Display the TC/UB/CLOCK menu screen. Press the Status button for 1 second or more to display OPEN EDITSEARCH MONITOR the TOP MENU screen.
  • Page 55: Codes Recorded On Tape

    TC GENE switch 10-4 Reproducing Time Codes The GY-DV5100 incorporates a time code reader. During playback, the time code or user’s bit data recorded on the tape is displayed on the LCD monitor or in the viewfinder. (Status screen) Setting Playback time code indication ☞...
  • Page 56: Advanced Process Screen

    CH-1 CH-2 SPOT L COMPRESS AUTO MANUAL Set the mode of the GY-DV5100 with the MODE switch. (Camera mode or VTR mode) POWER Press the STATUS button for 1 second or longer. ● The TOP MENU screen appears. STATUS button Select the menu screen to be set.
  • Page 57: File Manage Menu Screen

    11. MENU SCREENS 11-4 TOP MENU Screen Different menu screens are displayed depending on whether the GY-DV5100 is in the Camera mode or in the VTR mode. In the VTR mode, the CAMERA OPERATION and CAMERA PROCESS menu screens are not displayed.
  • Page 58: Camera Operation Menu Screen

    11-5 CAMERA OPERATION Menu Screen The CAMERA OPERATION menu screen is only displayed in the Camera mode. Item Function SHUTTER The SHUTTER button on the right side section is used to select STEP for fixed shutter speed or V.SCAN variable scanning rate for shooting computer monitor screens.
  • Page 59: Advanced Process Screen

    Item Function SKIN DTL Sets the Skin Detail function to ON or OFF. DETECT ON : Skin Detail function activated. OFF : Skin Detail function not activated. ☞ See “Using the Skin Detail Function” on page 95. V.RESOLUTION Increases the vertical resolution. ●...
  • Page 60: Skin Color Adjust Screen

    48K : Recording is performed with 16-bit, 48 kHz sampling frequency * The DV format offers recording tracks for up to 4 channel when using 12-bit, 32 kHz sampling. The GY-DV5100 records two of these track. The GY-DV5100 does not allow after-recording.
  • Page 61 4 channels. (Can only be set in the VTR mode.) CH1/2 : To reproduce the sound recorded on CH-1 and CH-2. CH3/4 : To reproduce the sound of the CH-3 and CH-4 channels. MEMO: The GY-DV5100 does not allow after-recording on the CH-3 and CH- 4 channels. STEREO AUDIO...
  • Page 62 10%. ● Remaining battery levels in [min] and [%] can be selected when an Anton-Bauer Battery Holder (QR JVC DIGI) is attached. Remaining battery level is shown automatically in [V] when using other battery holders.
  • Page 63 11-11 TC/UB/CLOCK Menu Screen Time codes and user’s bits can be set on this screen. Date and time is set on the screen that can be reached from this screen. Item Function TC PRESET To preset the time code, align the cursor with this position and then press the SHUTTER dial.
  • Page 64: Header Rec Menu Screen

    11. MENU SCREENS 11-12 HEADER REC Menu Screen The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 58) Item Function START KEY Sets whether the HEADER REC operation should be executed when the VTR trigger button is pressed while the STOP button is pressed.
  • Page 65: Others Menu Screen

    Selects whether or not the VTR trigger command should be output through TRIGGER the DV connector. Set to ON when the GY-DV5100's DV signal should be recorded on another component for backup. OFF : VTR trigger command is not output.
  • Page 66: Features Of The Camera Section

    12. FEATURES OF THE CAMERA SECTION 12-1 Full-Time Auto White Balance (FAW) The FAW function adjusts the white balance ––– CAMERA OPERATION ––– value automatically as the lighting condition SHUTTER STEP changes. GAIN L GAIN M This mode is convenient when you have no time to adjust the GAIN H white balance or when the camera is moved frequently in and LOLUX GAIN...
  • Page 67: Adjusting The Shutter Speed

    12. FEATURES OF THE CAMERA SECTION 12-3 Adjusting the Shutter Speed Adjust the shutter speed to obtain special effects or when shooting scenes with slow-moving subjects. Setting ■ Set the SHUTTER item on the CAMERA OPERATION menu screen. STEP OPEN EDITSEARCH MONITOR FILTER...
  • Page 68: Gain (Sensitivity) Adjustment

    12. FEATURES OF THE CAMERA SECTION 12-5 Gain (Sensitivity) Adjustment The gain should be switched when the brightness is insufficient due to poor lighting conditions. GAIN SWITCHING This switch allows the gain to be boosted when the illumination GAIN switch of the subject is insufficient.
  • Page 69: How To Use Skin Detail

    12. FEATURES OF THE CAMERA SECTION 12-7 How to Use Skin Detail The contour emphasis in the skin color areas of the video signal can be controlled and made to appear gentle and smooth. ■ Setting the Color and Range of the Skin Detail Function OPEN EDITSEARCH...
  • Page 70: Alarm Indications And Actions

    13-1 Alarm Indications and Actions The GY-DV5100 displays messages on the LCD monitor and in the viewfinder in the case of improper operation, notices on remaining battery power and tape and warnings in the case of abnormalities during VCR operation.
  • Page 71: Precautions For Use Of Head Cleaning Tape

    About 3 min. before tape end The transient section between scenes (displayed during recording). recorded on other units and those Tape end recorded on the GY-DV5100 may appear (displayed during recording). disturbed. Remaining battery power is low. The front section’s audio level control doesn’t work.
  • Page 72: Hour Meter Display

    13. OTHERS 13-3 Hour Meter Display The GY-DV5100 can display the accumulated running time of the head drum in the HOUR METER item on the OTHERS (2/2) menu screen. Use this as a guide for periodical maintenance. ☞ See page 7.
  • Page 73: Specifications

    Recording format : 16-bit, 48 kHz, 2-channel PCM * Service parts number audio/12-bit, 32 kHz 4-channel For details, consult your JVC dealer. PCM audio (2 channels for recording) Frequency response : 20 Hz to 20 kHz (in 48 kHz mode) Design and specifications are subject to change without Wow &...
  • Page 74 YH16 × 7K12U, YH19 × 6.7K12U (CANON) AC power adapter : AA-P250 Microphone : MV-P615U, MV-P618U Microphone holder : KA-A50U Battery case : SCV2978-002 Anton-Bauer battery holder : QR JVC DIGI EXTERNAL DIMENSIONS (unit: mm) EDITSEARCH MONITOR FILTER 3200K 5600K 5600K 5600K 1 64 / ND...
  • Page 75 ® is a registered trademark owned by Victor Company of Japan, Limited ® is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. © 2004 Victor Company of Japan, Limited ® Printed in Japan is a registered trademark owned by Victor Company of Japan, Limited. ®...

This manual is also suitable for:

Gy-dv5101

Table of Contents