Removing The Battery Case And If Board - JVC GY-DV5000U Service Manual

(5) If it will be required to repair or maintenance at the VCR unit
which is removed, refer to the section 2.
Fig.1-7-4
1.8

REMOVING THE BATTERY CASE AND IF BOARD

ASSEMBLY
(1) Remove the battery case according to the instruction book
page xx.
1
(2) Remove the 2 screw . Then remove the cover plate (black)
and non fixed plate.
Cover plate
Shield plate
Fig.1-8-1
(3) Remove the 3 screws
1.9 SERVICE MENUS
1.9.1 Modes required in servicing
(1) While holding down the specified button(s) (FAS, LOLUX),
press and hold the STATUS button for more than 1 second
in order to display the first-level menu of the service menu
hierarchy. The items in the first-level menu vary according
to which specified button is being held at the moment the
MENU button is pressed. (Characters are displayed on LCD
monitor screen or View finder.)
Item
1
CAMERA1 MENU
CAMERA2 MENU
CAMERA3 MENU
VTR1 MENU
VTR2 MENU
VTR3 MENU
DIP SW
HOUR METER
ERROR HISTORY
OTHERS
CPU VERSION
Table 1-9-1 Service Menu First Tier List
2
. Now the IF board can be removed.
Fig.1-8-2
When power up
Displayed Content
Activation Method
FAS LOLUX
Camera setting, blemish detect
Error correct ON/OFF
AW data reset menu
Repeat, FF/REW speed setting
Long pause, shutdown setting
Reserved
DIP SW MENU
Hour Meter indication
Warning History
MENU SAVE etc.
CPU Version indication
2
Holding Holding
DISPLAY DISPLAY
button button
FAS+
LOLUX
1-7