Table of Contents
Advertisement
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Removing the bottom cover assembly (See Figure 1)
(1) Remove the seven screws A attaching the bottom cover
assembly.
• The screws indicated with the
moved.
A
3.2
Removing the upper assembly (See Figure 2, Figure 3,
Figure 4, Figure 5, Figure 6, Figure 7, Figure 8)
(1) Remove the four screws A attaching the shoe assembly,
then remove the shoe assembly.
Shoe assembly
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
marks need not be re-
Bottom cover
assembly
Fig.1
A
Fig.2
(2) Remove the four screws B attaching the grip cover, then
remove the grip cover.
• Before attaching the grip cover, attach the three tabs on
the grip cover first.
Grip cover
Tabs
Fig.3
(3) Remove the two screws C and the two screws D attaching
the jack cover, then remove the jack cover.
Screw C: Short
Screw D: Long
Open the
mic cover
D
C
a a
C
Fig.4
(4) Remove the three screws E and the one screw F attaching
the upper cover assembly, then remove the upper cover
assembly.
Screw E: Short
Screw F: Long
E
Upper cover assembly
F
Fig.5
B
B
B
D
The Jack cover is done in
the slide while pushing arrow
"a" part.
Jack cover assembly
E
(No.HC044<Rev.001>)1-5
Advertisement
Table of Contents
