Necessary Settings Before Use; Charging The Battery Pack - JVC GZ-MG135AH Instructions Manual

Necessary Settings before Use

MENU
Set Lever
Be sure to confi gure the following three
settings before use.

Charging the Battery Pack

1
Set the power/mode switch to OFF.
Slide while pressing down the lock button.
2
Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera
12
Access/Charge
Lamp
Power/Mode
Switch
MODE
ON
OFF (CHARGE)
BATT.
3
Connect the AC adapter.
DC Connector
AC Adapter
Open the cover.
•
You can also connect the AC adapter using
the Everio dock connector. (
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the power cord from the AC
outlet and disconnect the AC adapter from
the camera.
Required charging / recording time
(approx.)
The values within ( ) are the times when the
LED light is on.
Battery pack Charging time
BN-VF808U
1 hr. 30 min.
(Provided)
BN-VF815U 2 hr. 40 min.
BN-VF823U 3 hr. 50 min.
8 To detach the battery pack
Slide and hold BATT. (
remove the battery pack.
8 To check the remaining battery power
See page 14.
NOTES
•
You can also use the camera with just the AC
adapter.
•
Please do not pull or bend the AC adapter plug
and cable. This may damage the AC adapter.
To AC Outlet
(110V to 240V)
Power
Cord
pg. 6)
Recording
time
1 hr. 35 min.
(1 hr. 30 min.)
3 hr. 15 min.
(3 hr. 5 min.)
4 hr. 55 min.
(4 hr. 35 min.)
step 2), then