How To Use Command-Line; Requirements Of Software And Hardware; Getting Help; Use History Commands - Raisecom OPCOM3100 series Configuration Manual

3.1 Requirements of software and hardware

Operation environment of hardware: platform of OPCOM3100
Operation environment of software: WIN98/WIN2000/WINDOWS XP

3.2 Getting help

command
help
abbreviated-command-entry?
abbreviated-command-entry<Tab> Supplementing an unfinished command.
?
command?

3.3 Use history commands

There are 20 history commands in the memory of the device system by default. User can
configure the number of history commands that system can save by the command-line:
OPCOM3100> terminal history <0-20>
Use history to show commands that has been entered.

3.4 Editing properties

up arrow:
down arrow:
left arrow:
right arrow:
backspace:
Ctrl+d:

3 How to use command-line

Computer serial interface;
Function description
Getting a brief description from help system
Obtaining a list of commands that begin with a
particular character sequence
（abbreviated-command-entry）
For example:
OPCOM3100#en ?
english
enable
For example:
OPCOM3100#show mac<TAB>
OPCOM3100#show mac-address-table
Listing all the commands in this mode
For example:
OPCOM3100#？
Listing all the key words, options and brief help
information of a command.
OPCOM3100#show ?
last entered command
next entered command
move a character left
move a character right
delete a character in front of the cursor
delete a character at the cursor
Raisecom Technology Co., Ltd
5