Configuring System Commands; Basic System Commands And Configuration; Managing Configuration Files And Startup Files; Configuration Files - Raisecom OPCOM3100 series Configuration Manual

4 Configuring system commands

Basic system configuration and user management.

4.1 Basic system commands and configuration

chinese show help information of the command in Chinese
english show help information of the command in English
clear clear the information on the screen
list show the list of all the commands in one mode
settime change the system time

4.2 Managing configuration files and startup files

4.2.1 Configuration files

The present reserved configuration file name is startup_config.conf by default.
Use write command to write the configuration file into the flash file system,
when the system resets next time, the reserved configuration information will be
configured again.
Use erase command to delete that file
The reserved configuration information file startup_config.conf can be uploaded
to the server by commands upload and download through the FTP protocol or
TFTP protocol, or downloaded to system to replace the old configuration
information.
Use show startup-config command to show the reserved configuration
information.
Use show running-config command to show the present configuration
information.

4.2.2 Startup file

Same as program file, and the file name must begin with OPCOM3100, present
program file name is: OPCOM3100-040109.Z;
The program file can be uploaded to the server by commands upload and
download through the FTP protocol or TFTP protocol, or downloaded to
system.
Use show version to check the version information.
Raisecom Technology Co., Ltd
7