Table of Contents
Advertisement
10 Network topology of incontinuous DCC
Network topology:
If the network is not only organized by OPCOM3100, DCC channel is not continuous
when there are other types of device or network, in this case we use data network to
manage and control remote OPCOM3100.
Network management configuration
10.1 Configuration commands
Command
ip address A.B.C.D
snmp community
COMMUNITYNAME
[RO|RW]
snmp-server
host
A.B.C.D {<1-65535>}
10.2 Examples
Configure the network management IP address of OPCOM3100 as 192.168.4.28, and
network management host IP address is 192.167.4.250, ro and rw communities are
public, private.
OPCOM3100# config
Configuration mode, one command input per times. End with CTRL-Z.
OPCOM3100(config)#interface snmp
OPCOM3100(config-snmp)#ip address 192.168.4.28 255.255.255.0
OPCOM3100(config-snmp)#exit
OPCOM3100(config)# snmp-server community private rw
Set successfully
OPCOM3100(config)# snmp-server community public ro
Set successfully
Description
Mode
Configure
OPCOM3100(config-snmp
network
)#
management IP
Configure SNMP
opcom3100(config)#
community
Configure
trap
opcom3100(config)#
server
28
Raisecom Technology Co., Ltd
Limitation
Advertisement
Table of Contents
