Raisecom OPCOM3100 series Configuration Manual page 36

sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 22
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 23
...
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 27
OPCOM3100(config)#
Interface E1 1
OPCOM3100(config-e1/1)#
Timeslot add sdh 1 vc12 1
......
Same as previous
OPCOM3100(config)#
Interface Eth 1
OPCOM3100(config-eth/1)#
Timeslot add sdh 1 vc12 16-20
show sdh crossconnect
Show interface sdh 1 timeslot
B configure the device
Command
config
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 11
......
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 20
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 23
......
22
Configure crossconnect of the service from C to
D, timeslot 23-27 of optical interface 1 to
23 timeslot 23-27 of optical interface 2.
27
Enter E1 interface configuration mode
Configure E1 interfaces 1 to 10 the timeslots 1
to 10, correspond one to one.
Configure E1 interfaces 11 to 15 the timeslots
11 to 15, correspond one to one.
Enter Ethernet interface configuration mode
Configure Ethernet interface 1 the timeslots
16-20
Show all the information of crossconnect
Show the information of timeslot
Description
Enter global configuration mode
Configure crossconnect of the service from A to
C, timeslot 11-20 of optical interface 1 to
11 timeslot 11-20 of optical interface 2.
20
Configure crossconnect of the service from C to
D, timeslot 23-27 of optical interface 1 to
23 timeslot 23-27of optical interface 2.
35
Raisecom Technology Co., Ltd