Table of Contents
Advertisement
OPCOM3100(config-eth/1)#
Timeslot add sdh 1 vc12 16-20
OPCOM3100(config-e1/23)#
Timeslot add sdh 1 vc12 23
......
show sdh crossconnect
Show interface sdh 1 timeslot
D configure the device
Command
config
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot 1 destination-port
2 timeslot 1
......
OPCOM3100(config)#
sdh crossconnect source-port
1
timeslot
destination-port 2 timeslot 20
OPCOM3100(config)#
Interface E1 21
OPCOM3100(config-e1/21)#
Timeslot add sdh 1 vc12 21
......
OPCOM3100(config-e1/23)#
Timeslot add sdh 1 vc12 23
......
show sdh crossconnect
show interface sdh 1 timeslot
Configure Ethernet interface 1 the timeslots
16-20
Configure E1 interfaces 23 to 27 the timeslots
23 to 27, correspond one to one.
Show all the information of crossconnect
Show the information of timeslot
Description
Enter global configuration mode
Configure crossconnect of the service from A to
B, timeslots 1-10 of optical interface 1 to
timeslots 1-10 of optical interface 2.
Configure crossconnect of the service from A to
C, timeslots 11-20 of optical interface 1 to
timeslots 11-20 of optical interface 2.
20
Enter E1 interface configuration mode
Configure E1 interfaces 21 to 22 the timeslots
21 to 22, correspond one to one.
Configure E1 interfaces 23 to 27 the timeslots
23 to 27, correspond one to one.
Show all the information of crossconnect
Show the information of timeslot
37
Raisecom Technology Co., Ltd
Advertisement
Table of Contents
