please input mode choose...
E: Enter 2 to choose network for downloading, the interface is as follows:
starting config network infor ...
Enter host IP address, file name, user name and password of FTP in turn, and then
get into the interface as follows:
starting connect host, please waiting...
choose flash disk for updating core file.
please input disk choose...
Put the new program file in flash zone or CORE zone, after confirming there will be
the following information:
start update core, please wait some minutes.....
success
Now the program upgrade has been finished.
4.3 User management
The system has a default username raisecom and the password raisecom;
Add a new user, the steps are as follows:
steps
Command
1
user USERNAME password
{ no-encryption | md5 }
PASSWORD
host ip address: 192.168.2.225
filename: OPCOM3100-040109.z
usr: wrs
passwd: wrs
-----------------------------------
-
1.
|
flash:
-----------------------------------
-
2.
|
CORE:
-----------------------------------
-
3.
|
cancel:
-----------------------------------
-
-
-
Description
USERNAME user name;
Password password;
{ no-encryption | md5} password not
enciphered or enciphered by MD5;
11
Raisecom Technology Co., Ltd