Table of Contents
Advertisement
4.2.3
Upgrade the program file from bootrom
There are two ways to upgrade the program file, one is using the serial port through
Xmodem protocol, and the other is using network through FTP protocol, the specific
operations are as follows:
Upgrade the grogram file by the serial port
A: The user who has management privilege can login and enter the privileged
EXEC by the serial port;
B: Enter reboot command;
C: Press the space key to enter the [raisecom] interface, enter? to show the
command list.
D: Enter u to upgrade program file, the interface is as follows:
choose mode for updating core file.
please input mode choose..
E: Enter 1 to choose the serial port for downloading, the interface is as follows:
choose serial baud rate for updating core file.
please input baud rate choose...
F: After entering the chosen baud rate, the system is waiting to transmit upgrade file
?
show this list
h
show this list
e
erase Flash
i
modify network manage port ip address
c
choose default image file
s
show network manage interface information
u
update your system
m
update microcode
r
reboot system
-----------------------------------
-
1.
|
-----------------------------------
-
2.
|
-----------------------------------
-----------------------------------
-
1.
|
-----------------------------------
-
2.
|
-----------------------------------
-
3.
|
-----------------------------------
-
4.
|
-----------------------------------
-
5.
|
-----------------------------------
Raisecom Technology Co., Ltd
serial
-
network
-
9600
-
14400
-
19200
-
38400
-
115200
-
8
Advertisement
Table of Contents
