Table of Contents
Advertisement
After downloading there will be the command-line:
Do you want to update core code? <Y/N>y
Choose y and then finish the program upgrading.
Use network to upgrade the program file through FTP protocol:
A: The user who owns the management privilege can login and enter the privileges
EXEC mode by the serial port;
B: Enter reboot command;
C: Press the space key to enter the [raisecom] interface, enter ? to show the command
list.
D: Enter u to upgrade program file, the interface is as follows:
choose mode for updating core file.
?
show this list
h
show this list
e
erase Flash
i
modify network manage port ip address
c
choose default image file
s
show network manage interface information
u
update your system
m
update microcode
r
reboot system
-----------------------------------
-
1.
|
-----------------------------------
-
2.
|
-----------------------------------
Raisecom Technology Co., Ltd
serial
-
network
-
10
Advertisement
Table of Contents
