Raisecom OPCOM3100 series Configuration Manual page 37

OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 27
OPCOM3100(config)#
Interface E1 1
OPCOM3100(config-e1/1)#
Timeslot add sdh 1 vc12 1
......
OPCOM3100(config-e1/21)#
Timeslot add sdh 1 vc12 21
......
show sdh crossconnect
Show interface sdh 1 timeslot
C configure the device
Command
config
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot 1 destination-port
2 timeslot 1
......
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 10
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 21
OPCOM3100(config)#
sdh crossconnect source-port
1 timeslot
destination-port 2 timeslot 22
OPCOM3100(config)#
Interface E1 11
OPCOM3100(config-e1/11)#
Timeslot add sdh 1 vc12 11
......
OPCOM3100(config)#
Interface Eth 1
27
Enter E1 interface configuration mode
Configure E1 interfaces 1 to 10 the timeslots 1
to 10, correspond one to one.
Configure E1 interfaces 21 to 22 the timeslots
21 to 22, correspond one to one.
Show all the information of crossconnect
Show the information of timeslot
Description
Enter global configuration mode
Configure crossconnect of the service from A to
B, timeslot 1-10 of optical interface 1 to timeslot
1-10 of optical interface 2.
10
Configure crossconnect of the service from B to
D, timeslot 21-22 of optical interface 1 to
21 timeslot 21-22 of optical interface 2
22
Enter E1 interface configuration mode
Configure E1 interfaces 11 to 15 the timeslots
11 to 15, correspond one to one.
Enter Ethernet interface configuration mode
36
Raisecom Technology Co., Ltd