Networking; Point To Point Topology; Chain Topology - Raisecom OPCOM3100 series Configuration Manual

Sdh

Table of Contents

Raisecom Technology Co., Ltd

9 Networking

OPCOM3100 is available for low order cross connect of VC-12.

With bi-directional optical interfaces and tributary interfaces of Ethernet and E1,

OPCOM3100 can be configured conveniently to satisfy all the topologies of user access

networks showing as follows:

Topologies

Network of point to point topology is available for LAN relay and extending or replace the

old PDH. The networking is as follows:

Topology

TM device can configure point to point none-protection network, and double TMs can

configure the linear low order VC protection of STM-1 level. When configured as 1+1

protection mode, the two optical interfaces can protect each other to enhance service

reliability.

Network of chain topology is available for the service flow distributed in chain form and

tributary networks in chain form. Network with OPCOM3100 is as follows:

Table of Contents