Parameters; Interface Specification; Ethernet Interface Specification; Optical Interface Specification - Raisecom RCMS2101-30-FV35 User Manual

3.1. V.35 Interface Specification
Physical characteristic:
Type of interface:
Working mode:
Bit rate:

3.2. Ethernet Interface Specification

Ethernet auto-negotiation and auto-MDI/MDIX capabilities can be enabled and disabled
Supports IEEE 802.3 and IEEE 802.3u standard, auto-negotiation or forced working mode
Supports IEEE 802.1d Spanning Tree
Supports IEEE 802.1q VLAN
Supports oversized Ethernet data frame up to 1916 bytes
Transmission speed: 10/100M auto negotiation
Flow control: IEEE802.3x and back pressure

3.3. Optical Interface Specification

Named bit rate:
Fiber connector:
Transmission distance:

3.4. Occupation of V.35 Interface Bandwidth in Framed E1 Timeslot

Occupation of timeslot in PCM31 mode
In PCM31 mode, N ≤ 31, Slot 0 is occupied. N shall be counted from Slot 1.
TS[0]
TS[1]
Occupation of timeslot in PCM30 mode
In PCM30 mode, N ≤ 30, Slot 0 and Slot 16 are occupied. N shall be counted form Slot 1, and Slot 16
shall be skipped if N is larger than 16.

3. Parameters

Compliant to V.35 interface specification
ISO2593 female connector (34-pin female)
DCE
N*64Kbps (N=1~31) at framed E1 mode
2048Kbps at unframed E1 mode
150Mbps
SC
Multi-mode dual-strand M=0~2km
Single mode dual-strand S1=0~25km, S2=10~60km, and S3=15~120km
Single mode single strand dual-wavelength S1=0~25km and S2=10~50km
V.35 BANWIDTH
¡ - ¡ -
TS[N]
5
Raisecom Technology Co., Ltd
¡ - ¡ -
TS[31]