Table of Contents
Advertisement
VB9001 User Manual
5. Hardware Installation
5.1
Suggested minimum chassis dimensions
The VB9001 can be fitted into any chassis that has mounting holes compatible with the standard SBC mounting
hole locations. Additionally, the chassis must meet the minimum height requirements for specified areas of the
mainboard.
5.1.1
Suggested minimum chassis dimensions
The figure below shows the suggested minimum space requirements that a chassis should have in order to
work well with the VB9001.
1.5mm
5mm
1mm
1mm
Figure 27: Suggested minimum chassis dimensions
Each side of the mainboard should have a buffer zone from the internal wall of the chassis. The side of the
mainboard that accommodates the I/O coastline should have a buffer of 1.5mm; it's comprised of one COM
port, and five Gigabit Ethernet ports. The side on the opposite end of the I/O coastline should have a buffer of
at least 1mm. The right side of the I/O coastline should have a buffer of 1mm and it's only comprised of a DC-in
jack. The left side of the I/O coastline should have a buffer of at least 5mm.
17
Advertisement
Table of Contents
