Hardware Installation Hardware Installation; Installing The Vab-1000-T - VIA Technologies VAB-1000 User Manual

4. 4. 4. 4. Hardware Installation Hardware Installation
Hardware Installation Hardware Installation

4.1. Installing the VAB-1000-T

The VAB-1000 board comes with a VAB-1000-T companion card. The VAB-
1000-T companion card is connected through CN6, CN7, CN8 and CN9 pin
headers.
Step 1 Step 1 Step 1 Step 1
Align the Audio and Front panel_USB_COM board-to-board connectors on
the VAB-1000-T with the CN6 and CN7 combinations pin header block on the
VAB-1000 board.
Figure 28 Figure 28: Installing the VAB : Installing the VAB- - - - 1000
Figure Figure 28 28 : Installing the VAB : Installing the VAB
Step 2 Step 2
Step 2 Step 2
Then gently press down and apply even pressure until the pins on the VAB-
1000 board have been fully inserted into the Audio and Front
panel_USB_COM board-to-board connectors of the VAB-1000-T companion
card.
1000- - - - T companion card T companion card
1000 1000 T companion card T companion card
VAB- - - - 1000 User Manual VAB 1000 User Manual
VAB VAB 1000 User Manual 1000 User Manual
34