S5 Rtc Wake Settings; Wake System With Fixed Time; Figure 34: Illustration Of S5 Rtc Wake Settings Screen; Figure 35: Illustration Of Wake System With Fixed Time Screen When Enabled - VIA Technologies VB9001 User Manual

6.6.1 S5 RTC Wake Settings
This section enables the S5 RTC Wake system to wake from S5 using RTC alarm.
Aptio Setup Utility Copyright (C) 2011 American Megatrends, Inc.
Advanced

Wake system with Fixed Time

Wake system with Dynamic Time
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.

Figure 34: Illustration of S5 RTC Wake Settings screen

6.6.1.1 Wake System with Fixed Time
This feature has 2 options: Enable or Disable system wake on the alarm event. When enabled, the system will
wake on the hr:min:sec specified.
Aptio Setup Utility Copyright (C) 2011 American Megatrends, Inc.
Advanced
Wake system with Fixed Time
Wake up hour
Wake up minute
Wake up second
Wake system with Dynamic Time
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.

Figure 35: Illustration of Wake System with Fixed Time screen when Enabled

[Disabled] Enables or disables System wake
on alarm event. When enabled,
[Disabled] System will wake on the
hr::min::sec specified
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ECS: Exit
[Enabled] Enable or disable System wake
0 on alarm event. When enabled,
System will make on the
0
hr::min::sec specified
0
[Disabled]
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ECS: Exit
VB9001 User Manual
23