Hardware Installation; Installing The Vnt9271 Usb Wi-Fi Dongle; Figure 34: Inserting The Vnt9271 Usb Wi-Fi Module - VIA Technologies EPIA-E900-12Q User Manual
Epia-e900 series.
pico-itxe board with 1.2ghz via eden
x4 processor, mini hdmi,
2 x usb 3.0, 2 x usb 2.0, 2 x com, 2 x gigabit ethernet, sata and 12v
dc-in
Table of Contents
Advertisement
5. Hardware Installation
This chapter provides information about hardware installation procedures.
5.1. Installing the VNT9271 USB Wi-Fi Dongle
Step 1
Locate a USB 2.0 or USB 3.0 port on the panel I/O.
Step 2
Insert the VNT9271 USB Wi-Fi dongle into the USB 2.0 or USB 3.0 port.
Figure 34: Inserting the VNT9271 USB Wi-Fi module
EPIA-E900 User Manual
33
Advertisement
Table of Contents
