Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Chauvet DJ Wash FX Hex
Summary of Contents for Chauvet DJ Wash FX Hex
- Page 1 Wash FX Hex User Manual...
-
Page 2: Table Of Contents
Sound-Active Mode.................... Preset Color Mode ..................... Custom Color Mixing ..................Master/Slave Mode ..................IRC-6 Infrared Remote Control ..............IRC-6 Operation ....................5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................Wash FX Hex User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Wash FX Hex are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If you sell the product, be sure that they also receive this document. Page 2 of 18 Wash FX Hex User Manual Rev. 1... -
Page 5: Introduction
NTRODUCTION 2. I NTRODUCTION Product Overview Microphone display Safety Menu loop buttons Power in/out Fuse Power holder Mounting bracket LEDs Wash FX Hex User Manual Rev. 1 Page 3 of 18... -
Page 6: Product Dimensions
NTRODUCTION Product Dimensions 11.2 in 285 mm 13 in 330 mm 6.3 in 160 mm Page 4 of 18 Wash FX Hex User Manual Rev. 1... -
Page 7: Setup
ETUP AC Power The Wash FX Hex has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 8: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Wash FX Hex may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes. -
Page 9: Operation
Press to scroll down the list of options or to find a lower value <ENTER> Press to activate a menu option or a selected value Menu Map Refer to the Wash FX Hex product page on www.chauvetdj.com for the latest menu map. Mode... -
Page 10: Configuration (Dmx)
PERATION Configuration (DMX) The Wash FX Hex works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. DMX Personalities The Wash FX Hex has four DMX personalities: 3Ch-, 6Ch-, 11Ch, and 40-channel personality. - Page 11 000 255 0–100% Blue zone 6 000 255 0–100% Amber zone 6 000 255 0–100% White zone 6 000 255 0–100% UV zone 6 000 255 0–100% Wash FX Hex User Manual Rev. 1 Page 9 of 18...
-
Page 12: 11Ch
Percent/Setting 000 255 0–100% Green 000 255 0–100% Blue 000 255 0–100% Amber 000 255 0–100% White 000 255 0–100% 000 255 0–100% Page 10 of 18 Wash FX Hex User Manual Rev. 1... -
Page 13: 3Ch
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Automatic Programs To run the Wash FX Hex in automatic mode, follow the instructions below: Press <MENU> repeatedly until P--- shows on the display. Press <ENTER>. -
Page 14: Preset Color Mode
Of the four colors (red, green, blue, and UV), only three may be used at one time. Master/Slave Mode The Master/Slave mode allows a single Wash FX Hex product (the “master”) to control the actions of one or more Wash FX Hex products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either Stand-Alone mode or with the IRC-6, while the slave products will be set to operate in Slave mode. -
Page 15: Irc-6 Infrared Remote Control
PERATION IRC-6 Infrared Remote Control The Wash FX Hex is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until Set shows on the display. Press <ENTER> to accept. -
Page 16: Maintenance
Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans using compressed air because it may damage them. Page 14 of 18 Wash FX Hex User Manual Rev. 1... -
Page 17: Technical Specifications
ECHNICAL 6. T ECHNICAL PECIFICATIONS Dimensions and Weight ENGTH IDTH EIGHT EIGHT 11.2 in (285 mm) 6.3 in (160 mm) 13 in (330 mm) 7 lb (3.2 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power OWER UPPLY ANGE OLTAGE... -
Page 18: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 16 of 17 Wash FX Hex User Manual Rev. 1... -
Page 19: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, France, Germany, Benelux, or Mexico, contact the dealer of record. Wash FX Hex User Manual Rev. 1 Page 17 of 17...