Table of Contents
Advertisement
DMX Values
4Ch
8Ch
Function
1
1
Red
2
2
Green
3
3
Blue
4
4
Amber
–
5
Strobe
–
6
Auto programs
–
7
Auto speed
–
8
Dimmer
Standalone Configuration
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Preset Color Mode
To run the EZLink Par Q4BT ILS on a static color, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select a static color, from C 1–15.
4. Press <ENTER>.
Automatic Programs
To run the EZLink Par Q4BT ILS in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select an automatic program, from P 1–5.
4. Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the EZLink Par Q4BT ILS, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
3. Press <ENTER>. The product will return to the last selected mode.
Dimmer
To set the dimmer curve, follow the instructions below:
1. Press <MENU> repeatedly until d-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the dimmer, from L. 1–255.
4. Press <ENTER>.
11
Value
Percent/Setting
000
255
0–100%
000
255
0–100%
000
255
0–100%
000
255
0–100%
000
015
No function
016
255
Strobe, slow to fast
000
005
No function
006
055
Auto program 1 (programs 2–5)
056
106
Auto program 2
107
157
Auto program 3
158
208
Auto program 4
209
255
Auto program 5
000
250
Program speed, slow to fast
251
255
Sound-active mode
000
255
0–100%
EZLink Par Q4BT ILS User Manual Rev. 2
Operation
Advertisement
Table of Contents
