Operation
6-CH
Channel Function
1
Dimmer
2
Red
3
Green
4
Blue
5
White
6
Strobe
4-CH
Channel Function
1
Red
2
Green
3
Blue
4
White
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Programs
To run the EVE P-160 RGBW in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select an automatic program, from P 1–4.
4.
Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the EVE P-160 RGBW, do the following:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Use <UP> or <DOWN> to increase or decrease the program speed, from S 1–100.
3.
Press <ENTER>. The product will return to Auto mode.
Sound-Active Mode
To run the EVE P-160 RGBW in sound-active mode, do the following:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a sound-active program, from Snd1–2.
4.
Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To set the sound sensitivity on the EVE P-160 RGBW:
1.
Press <MENU> repeatedly until SenS shows on the display.
2.
Use <UP> or <DOWN> to increase or decrease the program speed, from u 0–100.
3.
Press <ENTER>. The product will return to Sound-Active mode.
EVE P-160 RGBW User Manual Rev. 1
Value
Percent/Setting
000
255 0–100%
000
255 0–100%
000
255 0–100%
000
255 0–100%
000
255 0–100%
000
015 No function
016
255 Strobe, slow to fast
Value
Percent/Setting
000
255 0–100%
000
255 0–100%
000
255 0–100%
000
255 0–100%
Page 9 of 15