TABLE 21 Diagnostics status LED during normal operation
LED color
Status of hardware
Off
System is functioning normally or the device did not perform
diagnostics test in the most recent reload.
Flashing green
System self-diagnostic tests are in progress.
Steady green
System self-diagnostic tests have successfully completed.
Flashing amber
System self-diagnostic test has detected a fan, thermal, or interface
fault.
Power status LED
Refer to the following table to interpret the system power status LED.
TABLE 22 System power status LED during normal operation
LED color
Status of hardware
Off
No power
Steady green
Internal power supply is working normally.
Steady amber
Internal power supply for the PoE ports has failed.
OOB LED
Refer to the following table to interpret the OOB LED.
TABLE 23 Link status (Green): Left side LED
LED color
Off
Steady green
Flashing green
TABLE 24 Speed status (Green): Right side LED
LED color
Off
Steady green
RJ-45 Ethernet port status LED in default mode
Refer to the following table to interpret individual RJ-45 Ethernet port status LED in default mode.
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
Hardware status
Offline
Link is up.
Packet transmission or reception is occurring at
the port.
Hardware status
Offline or linked at 10/100 Mbps.
Linked at 1000 Mbps.
Recommended action
None.
None.
None.
•
Check the syslog messages details.
•
Power cycle the device to try and clear the
condition.
•
If the condition persists, contact Technical
Support.
Recommended action
•
Check if internal power supply is disconnected.
•
Check the connections between the device,
the power cord, and the wall outlet.
•
Contact Technical Support.
None.
Contact Technical Support.
Recommended action
None.
None.
None.
Recommended action
None.
None.
Monitoring the Device
Interpreting port-side LEDs
97