Table of Contents
Advertisement
Connecting ICX 7150 Devices in a Stack
•
Stacking configuration requirements........................................................................................................................69
•
ICX 7150 stacking ports.......................................................................................................................................... 69
•
ICX 7150 stacking topologies.................................................................................................................................. 71
Stacking configuration requirements
Before configuring a traditional stack using the CLI, physically connect the devices with stacking cables. For more information on
configuring a stack, refer to the
ICX 7150 stacking ports
Depending on the model, up to eight SFP+ ports on the front panel of the ICX 7150 device support stacking. The ports can also be used as
uplink (data) ports. The following figures show the location and numbering for stacking ports. The numbering for the ports is in three-tuple
x / y / z ) and refers to StackID/Slot/Port.
format (
ICX 7150-C12P devices have two stacking ports on the front panel as shown in the following figure.
FIGURE 46 ICX 7150-C12P stacking ports
ICX 7150-24 and ICX 7150-24P devices have four stacking ports on the front panel as shown in the following figure.
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
FastIron Stacking Configuration Guide .
69
Hide quick links:
Advertisement
Table of Contents
