Device Management Options; Lrm Adapter Support - Ruckus Wireless ICX 7150-C12P Hardware Installation Manual

Device management options

You can use the management functions built into the device to monitor the topology, port status, physical status, and other information to
help you analyze switch performance and to accelerate system debugging. The device automatically performs power-on self-test (POST)
each time it is turned on. Any errors are recorded in the syslog messages.
You can manage the device using any of the management options listed in the following table.
TABLE 8 Management options for the device
Management tool
Command line interface (CLI)
Standard SNMP applications
Brocade FastIron Web Management Interface
Brocade Network Advisor (BNA)
NOTE
BNA must be purchased separately.

LRM Adapter support

Some ICX switches do not support Long Reach Module (LRM) optics on 10G fiber ports. LRM adapter can connect to any 10G fiber ports
of the ICX switch. It has two 10G fiber ports and both ports can be used at the same time.
The LRM Adapter is supported on all 10G fiber ports for all models of the ICX7150 Family of switches. Below is the front view of the LRM
adapter and the SPF+ Optic module with copper pigtail.
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
Out-of-band support
Ethernet, serial connection, or USB console
Ethernet or serial connection
Ethernet or connection via IP address
Ethernet or serial connection
Reference documents
Brocade FastIron Command Reference Guide
Feature-based Configuration Guides
Unified IP MIB Reference Guide
Brocade FastIron Web Management Interface
User Guide
NOTE
Not all FastIron features are
supported via the web management
interface.
Brocade Network Advisor documentation set
Device Overview
LRM Adapter support
19